Rubrique : Mesure et contrôle des fluides, pompes, débitmètres > Débitmètre, indicateur de débit, tachymètre       Rubrique, Rubrique:

IMPRIMER

RETOUR

Alimentés par pile
Capteur externe verrouillable
Conditionnement du signal par circuit à microprocesseur
Affichage de grandes dimensions
Unités de mesure choisies par l'utilisateur (FPS ou MPS)
Plage de mesure de 0,3 à 30,0 FPS (0,10 à 9,00 MPS)
Rapport 100:1
Canalisations à partir de Ø 6,3mm

The FD610 Series flowmeter features advanced Trans-Phase measuring technology, providing accurate and reliable flow velocity assessments in closed piping systems. The FD610 Series utilizes a non-invasive clamp-on transducer which is placed on the outside of a pipe. Within seconds, the large 18 mm (0.7") LCD provides stable flowrate readings in feet per second or meters per second. This product operates on metal or plastic pipes containing liquids with more than 25 ppm of 100 micron or larger suspended solids or entrained gases. PRINCIPLE OF OPERATION The FD610 Series flowmeter utilizes an advanced Trans-Phase measuring technique, providing accurate, non-invasive fluid velocity assessment without opening the pipe. The FD610 Series utilizes two piezoelectric crystals contained within one transducer to transmit ultrasonic energy into the fluid stream and receive back energy reflected off discontinuities (suspended particles or entrained gases) within the moving liquid. Transformations that result from the energy reflections are processed and converted to a measurement of fluid velocity by the sophisticated software algorithm. The processor also controls all operations of the instrument from its ultra-efficient battery management circuitry to a proprietary FIR (Finite Impulse Response) filtration program.

SPECIFICATIONS
Supply Voltage: Battery powered, non-rechargeable alkaline, four AA cells, providing over 30 hours of continuous operation
Flow Range: 0.30 to 30.00 FPS (0.10 to 9.00 MPS)
Display: Single line – four-digit LCD readout of velocity (18 mm (0.7") digits), signal strength, measuring units, and low battery indication
Temperature: -20 to 60°C (-28 to 140°F)
Enclosure Rating/Dimensions: NEMA-12X ABS plastic; 200 H x 100 W x 38 mm H (7.76 x 4 x 1.5")
Weight: 0.7 kg (1.5 lb)
Accuracy: ±2% full scale
Transducer
Transducer Material: Plated body; ULTEM 1000 sensor material
Cable: 2 m (6.6 ft) cable and connector
Temperature: -40 to 82°C (-40 to 180°F)
Humidity: 0 to 95% non-condensing
Mounting Method: Clamp-on style with DOW 111 coupling compound

Lire d'autres articles du même fournisseur

- Débitmètres FMA et FVL-1600
- Système d'acquisition de données, OMB-CHARTSCAN-1400
- Thermomètre Multimètre SUPERMETERTM HHM290 avec visée laser

Lire tous les articles de ce fournisseur

Lire d'autres articles de la même sous-rubrique

- Débitmètre volumique – PORTABLE, BIOS DC-LITE
- Débitmètres volumétriques à engrenages : Série VS
- Mesures de débits de liquides ou de gaz
- Contrôleurs de débit SIKA
- Contrôleurs de débit SW
- Contrôleur de débit ultra-son LDU

Voir tous les articles de la sous-rubrique Débitmètre, indicateur de débit, tachymètre

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category